Industrial extended 32GB eMMC
The eMMC refers to embedded multimedia card which puts the MMC components (flash memory plus controller) into a small ball grid array (BGA) package for use in circuit boards as an embedded non-volatile memory system. A vast majority of mobile devices use this form of flash for main storage on the device.
Supertechina eMMC adopted high graded nand flash chips and latest controllers to assure good compatibility with mobile phone, car navigators and other professional equipment and can work in severe cold and hot environment.
| Specification: | |
| Dimension: | 11.5(L)*13.0(W)*1.0(H)mm |
| Capacity: | 32GB |
| Structure: | Nand flash chips + controllers |
| Nand flash chips grades: | Original and good die |
| Nand flash chips kinds: | SLC, MLC, TLC (2D and 3D) |
| eMMC standard: | EMMC ver5.1 |
| Bus width: | 1 bit, 4 bit, 8 bit |
| Support: |
- JEDEC |
| - 12 wire bus (CLK, CMD, Data Strobe, DAT[7:0] and hardware reset (RST_n)） | |
| - Single Data Rate(SDR) and Dual Data Rate(DDR) | |
| - Original Boot and Alternative Boot modes | |
| - Data Removal (Erase, Trim and Sanitize) | |
| - Replay Protected Memory Block(RPMB) | |
| - Multiple Partitions with enhanced attribute | |
| - Lock/Unlock and Write Protection | |
| - Data Protection for Power Failure | |
| - Power Saving Sleep Mode | |
| - High Priority Interrupt(HPI) | |
| - Background Operation | |
| - Packed Commands | |
| - Sampling Tuning Sequence | |
| - Dynamic Power Manager : standby and sleep modes | |
| - 3.3V/1.8V power supply | |
| Up to 200mHZ clock speed |
|
| Technique parameters: | |
| Operating voltage: | - VCC = 2.7V~3.6V (typical 3.3V) |
| - VCCQ = 1.7V~1.95V(typical 1.8V), 2.7V~3.6V (typical 3.3V) | |
| Regular operating temperature: | -25 ℃ - 85 ℃ |
| Extended operating temperature: | -40 ℃ - 85 ℃ |
| Storage temperature: | -40 ℃ - 100 ℃ |
Certificate: |
|
| CE FCC ROHS |
|
Quality warranty term: |
|
| 5 years | |
